(Chaena) YY-6027-PC Sole Puncture Resistant Tester

Tlhaloso e Khutšoanyane:

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

I. Selelekelas:

A:(teko ea khatello e tsitsitseng): leka hlooho ea seeta ka tekanyo e sa khaotseng ka mochine oa ho hlahloba ho fihlela boleng ba khatello bo fihla ho boleng bo boletsoeng, lekanya bolelele ba bonyane ba cylinder ea letsopa e betliloeng ka har'a hlooho ea seeta sa teko, 'me u hlahlobe ho hanyetsa ha khatello ea seeta sa tšireletso kapa hlooho ea seeta se sireletsang. ka boholo ba yona.

B: (Teko ea ho phunya) :Mochini oa teko o phunya sepekere ho phunya sole ka lebelo le itseng ho fihlela sole e hlajoa ka ho feletseng kapa e fihla matla a itseng. Ho sa tsotellehe hore na sepekere se phunyeletsoeng se pepesitsoe ha sole e hlajoa ka ho feletseng kapa e fihla matla a itseng a sebelisoa ho hlahloba ts'ebetso ea ho thibela ho phunyeha ha lieta tsa tšireletso, lieta tse sireletsang kapa lieta tsa litsebi tse nang le li-soles tse bohareng tse thibelang ho phunya.

II. Main mesebetsi:

Mochine ona o sebelisoa haholo-holo bakeng sa hoteko ea khatello ea hlooho ea lieta tse sireletsehileng, sesebelisoa sa hlooho ea seeta se tsitsitseng ka lebelo la 5mm / min bakeng sa matla a ts'oarellang a kang: 15000N khatello ea khatello bakeng sa deformation ea metsotso ea 1.

Ho phaella moo, mochine o nkelang sebaka o ka sebelisoa bakeng sa teko ea ho phunya lieta tsa lieta tse sireletsehileng tse nang le litekanyetso tse fapaneng. Mohlala o behiloe sethaleng ka lebelo la 10mm/min ho Pierce sampole kapa zero ho lekola boholo ba matla a ho phunya ao thepa e ka mamellang.

III. Reference Standard:

GB/T20991-2007, ISO EN 20344-2007, CSA-Z195,ASTM F2413-2005, BS-953, GB21148-2007,ISO 22568le litekanyetso tse ling.

IV.Ilitšobotsi tsa seletsa:

RTPhekolo ea 'mele oa hae: phofo ea dupont ea United States, ts'ebetso ea ho penta ea electrostatic, mocheso oa ho folisa 200 ℃ ho etsa bonnete ba hore ha o nyamele nako e telele.

RCtaolo e kopantsoeng ea omputer, curve, ho latela boleng bo tsitsitseng, tlhahlobo ea mahloriso;

RCboemo ba ho lokisa, lebelo la teko ea inching lea fetoha;

RMlikarolo tsa echanical li entsoe ka sebopeho sa kutu le thepa ea tšepe e sa hloekang;

RPli-motors tsa ho lokisa, ts'ebetso e boreleli, lerata le tlase;

RTest ka konopo e le 'ngoe, ts'ebetso e bonolo le e bonolo;

RDli-sensor tse ouble, ho phunya le ho hatella liteko tse arohaneng, data e nepahetseng haholoanyane;

RBody e na le sesebelisoa sa tšireletso ea siling, e thibela ho falla ha moeli;

RCtlhophiso ea maemo a Europe, maemo a naha, maemo a Amerika, sehlopha sa tlhahlobo e tloaelehileng ea tlatsetso, projeke ea tlhahlobo e felletseng ea bareki;

RToe test mode switch, switch opereishene e bonolo;

RResults palo polokelo tshebetso, histori lintlha lintlha 20 bolokoa bokgoni;

RAirframe e amohela phokotso e kholo ea deformation ea sebopeho sa mochini, matla a phahameng, matla a ho jara;

V. Litlhaloso tsa Tekheniki:

1. Lebelo la teko: 5mm / min (lebelo la khatello ea static), 10mm / min (lebelo la ho phunya), 23mm / min (MAX lebelo le ka behoa)

2. Mojaro 1: 20000 lik'hilograma

3. O boima ba 2:20kg

4. Yuniti: lik'hilograma, N, Ib e ka fetoloa ka mokhoa o ikemetseng.

5. Display: ponts'o ea dijithale

6. Mokhoa oa teko: mamella khatello le ho phunya

7. Pphetoho: ± 0.25%

8. Vboholo: AC220V, 10A.